Chemical resistant

Dekro offers three main variants of chemical resistant paints

• Dekro Chlordek Enamel and Dekro Chlordek High Build, based on Chlorinated Rubber
  
• Dekro Epoxy Enamel, based on Epoxy Resins
  
• Dekro Adthane Polyurethane Enamel (Urethane Acrylic)

In each case careful attention must be given to the preparation of the surfaces.

The thickness of each coating is important in severe conditions.

It is also important to remember that in constantly corrosive conditions, individual coats become contaminated if left for too long before further coats are applied.

Heat resistant

Fluctuations in temperature impose more strain on the paint film than lengthy exposure to steady temperatures. However the resistance to moisture and chemical attacks diminishes after long exposure to high temperatures.

Freeze resistant

Temperatures below 5º C prevail in most cold storage rooms. The paint that is used should be able to withstand these temperatures as well as resist water, ice, salts, fats, oils, blood and other liquids. The paint should also be non-toxic and should not taint food.

We recommend Dekro Hydrosilk for plaster surfaces and Dekro Chlordek Chlorinated Rubber for all metals, wood, composition board, and plaster.

Water resistant

Most paints are water resistant to a degree but specific water resistance becomes imperative in certain situations - for example the painting of swimming pools and drinking-water tanks.

If painting water tanks, the paint that is used must not taint the water and should prevent rusting on the inside. Appearance is not imperative in this case.

Fungus resistant

Fungus growth occurs in damp rooms and buildings such as lavatories, basements, laundries, breweries and cellars. Fungi can remain dormant for long periods under dry conditions but are activated when the humidity rises above a certain level.

Prepare the surface by washing it down with Dekro Anti-Fungicide Solution to destroy any spores on the surface.

Fill in all cracks and imperfections, sand till smooth and remove all dust before starting to paint.

For product recommendations, advice or enquiries please contact us or call our toll-free help line on 0800 222 423.

back to top